The Reever’s Arms

19 01 2018

2018 is the year of extracting digit. My old gaming buddy, mugodice.wordpress.com, had wanted an inn for his games a couple of years ago and I had been putting it off.
The brief was that it had to occupy an eight inch square footprint.
So spoiling his birthday suprise here it is.

Advertisements




I have a cunning plan. Maybe?

18 01 2018

Somebody yesterday on the Oldhammer Community page in Friendface posted an interesting question.
“Has anybody made replacement doors for the Mighty Fortress?”
The Mighty Fortress was a polystyrene castle made by Games Workshop in the mid-eighties.
mf
Due to the age of this many of the plastic doors have disappeared or have been broken.
The-Doors
Some people on the Oldhammer page suggested 3D printing. This got me thinking.
Why can’t I laser cut replacements?
I dug my Mighty Fortress out and I used a piece of scrap 3mm MDF to guage sizes.
scrap
It fitted perfectly.
Next project.
group





Reflections on 2017

11 01 2018

I’m somewhat late on this one as I’ve been laid low with a rather unpleasant flu-like lurgy.
A quick catch-up on a couple of pieces from my last post.
barbarian
Here is the Barbarian from the OS Miniatures Company. This was a challenge that I undertook to have him painted before Christmas. Nobody else took up the challenge which was a pity.
santa
This was from Warmonger Miniatures, again painted up for Christmas.
There is one more figure which was supposed to be my last figure of 2017, but the lurgy stopped that. I’ll post when it is finished.
Old age seems to have telescoped the year. Blink and I’ll miss it.
The first three months were taken up with making the Rogue Stars display board. April/May I did some landscaping in the garden converting a be-shrubbed steep slope into a flat grassy terrace.
June/July/August were at Electric Love. I had a great time and it gave me enough money to buy my own small laser cutter.
The rest of the year seemed to evaporate, lttle jobs around the house and making bits with my loot from the summer.
2017
Here is a group shot of what I finished painting. There is a lot more half finished and the 2018 goal is to finish all the half started jobs from the past few years, the Heresy Dragon being the main target, get all that out of the way so I have a clean slate. Then one project at a time, start it and finish it.
Yeah right!
Product of the Year 2017
On reflection it has to be the laser cutter. It’s small and slow but it has enabled me to prototype ideas and to make stuff on the fly. Christmas cards, party invites, party bag goodies, cake icing molds and gift tags just to name a few bits and bobs.
Heroes and Zeroes
Firstly the Heroes.
At the top of the list are the Facebook friends; EvH, DW, SR, ME and CF. They have been a constant source (sauce?) of inspiration, advice and encouragement. I might actually meet some of them in RL oneday.
Then comes the figure manufacturers who have gifted me with lovely toys this last year.
Ramshackle Games
http://shop.ramshacklegames.co.uk/index.php
The OS Miniatures Company
https://www.facebook.com/OldSchoolMinis1985/
Avatars of War
http://www.avatars-of-war.com/eng/web/index.php?option=com_content&view=article&id=59&Itemid=51
Warmonger Miniatures
https://www.warmongerminiatures.com/
Finally Revolution Events
https://www.revolutionevent.com/
For fun, education and loot.
Now to the Zeroes
Wayland Games for lengthy delays, poor communication and their unwillingness (or inability) to combine orders.
TNT for their lack of customer service and making life just that little bit harder.
Games Workshop for tantalising me with the new rules for 40K, promises of fewer books and then conveniently forgetting about all that.
The new plastics are beautiful though.





A laser cutter which is all mine

30 11 2017

With my ill gotten gains from the summer I bought myself a laser cutter. It is a 30cm by 40cm machine from Shen Hui Laser Company based in China.
https://shenhuilaser.en.alibaba.com/
It was a bit of a performance getting it. First with the money transfer and then with TNT not communicating with itself.
But it arrived.
laser1
Unpacking revealed the quality of the components.


Not very good. There was great big screw in the middle of the work-bed which threw out any pretensions of a level work surface. And the airhose is of the cheapest material and finish one could imagine.
The provided software was unintuitive and useless.
Customer support is non-existent.
Thankfully there is the interweb. I found a piece of software called K40 Whisperer and some support groups dedicated to Chinese laser cutters.
It is slow and takes a couple of passes to cut through anything so it is only useful for prototyping ideas.
laser5
For the real work I’ll have to continue using Happylab in Salzburg.





Die Grüne Horde

4 06 2017

As usual I’m far behind in my posts. Laziness, a trip to Legoland and starting work at Electric Love Festival. The ELF is my work for the next seven weeks with some very long days ahead the nearer the festival gets, so don’t expect much posting from me. If all goes to plan I want to by a small (400mm x 300mm) laser cutter with the money.
This was the event that I had been invited to the previous year and due to communication problems I didn’t make it. This year I did. Okay there were some problems with road signage and autobahn exits that were closed, but I was there.
It was advertised as a gaming day and it most definitely it was. There were three tournaments that day; Warhammer 40K, Infinity and Firestorm Armada. Also being played was Saga, Bolt Action, the ubiquitous Frostgrave, X-Wing Age of Sigmar, Kings of War, Force on Force, Kugelhagel and a very brief appearance of Test of Honour (replaced by Halo Fleet).


It was held in a much larger space than the Austrian Salute. The thing I have found at gaming days is that I felt very slim. The average physique on display was, politely, well rounded.

My display


There was a painting competition, which obviously I entered. I ended up with a third place in the Unit Category. I did expect to be higher ranked in this one as the quality of the other entries was okayish, in the other categories there was better painting so I didn’t expect much there.

Painting competition area


Roll-the-Dice was trading there
http://www.roll-the-dice.de
And I had an interesting chat with Martin, the proprietor.
Walter (Austrian Salute) was there and it was nice to see him. We chatted about the new edition of Warhammer 40K coming soon. And he managed to chat me out of some money for when it is launched.
There was a pro painter there
http://www.crissis-bemalservive.de
She wasn’t up to the standard of Sigur of Battlebrush studios but she did have some interesting iridescent effects, but not using nail products which I am currently researching.
The lunch was mediocre, luke warm, but the service was excellent.
I didn’t demo the game at all and hardly sold anything. But I had some excellent conversations with people there.

Number One Son eying up a scratch built titan.


Overall it was a pleasant day, not sure if it is worth the effort though. Quite a lot of traveling for very little result. I’ll have to ponder whether I want to attend again.





Mini Maker Faire Salzburg

22 05 2017

As usual life keeps me busy so this is a late posting. I haven’t even had time to paint, that’s how busy it’s been.
Today (not really) I’m sat at the Mini Maker Faire in Salzburg, the first one at this location.
http://makerfaire.com/
I feel a little out of place as everything is tech orientated and hands-on whereas my display is quite static.
mf3
Just across from me is a packed Lego Robotics table.
I’ve produced some bits and pieces to sell, very different from my usual stuff, made mostly from off-cuts of wood found at Happylab.
mf2
The event was really well organised and very friendly.
A lot of people stopped by to admire my stuff and ask questions about what I had made. Many children were fascinated by the little waterway in my display board and kept touching it to see if it was real water.
I met a few people who have been using Happylab and it was nice to be complimented on my finished work as they had only seen random unfinished bits.
Number One Son greatly enjoyed working on the electronics and made, with instruction, a singing pencil.
mf1
I can’t see things like this happening in England, children with knives and soldering irons. Another reason why it was good to move. Number One Son would like to do more electronics. So I think a crash course for me might be in order as I cannot read a wiring diagram.

Star Cops in action!

Star Cops on patrol


Here are some more photographs of the event.
https://www.makerdays.at/faire/impressionen-der-makerfaire/





Sometimes I wonder why I bother

3 05 2017

I really cannot for the life of me understand why people are prepared to pay me double the amount I pay myself laser-cutting for a few hours work pulling up weeds in their gardens.
Is there no value to creativity?
On the plus side though, it means I can afford to get a few tools for the workshop.








Olleys Armies Blog

Olleys Armies Miniatures Blog, News and Workbench

Onyx's Hobby Blog

Just a little bit about my hobby activities.

amateur airplanes

Let's build.

davidneat

a maker, a teacher of making

one page rules

Wargaming made simple and fun!

Words on a blackboard

In a world of poems, words steal love and put it on a blackboard

The Grey Mountains

The adventures of my Greenskins, Dwarfs, and Bretonnians

quirkworthy.wordpress.com/

A game designer's view of gaming

dhcwargamesblog

I play for fun... all else I take seriously

Da Mekshop

Collecting and Playing Orks

Herr Brush

A Hobby Blog

Dropship Studio

The incoherent ramblings of wargamer and painter Carl Woodrow

medievalfragments

Turning Over a New Leaf

The Lost and the Damned

Fantasy, sci-fi and historical miniature gaming

Dagger and Brush, Daggerandbrush, dagger brush

Miniature painting, wargaming terrain tutorials, reviews, interviews and painting guides

twistedtoys

Gaming Banter

D6 Painting & Gaming

Miniature painting and gaming from under the stairs